High Precision Self-aligning Ball Bearings Chrome steel GCr15 1200ATN
Self-aligning Ball Bearings are bearings equipped with round balls among the internal ring of two raceways and the outer ring of which the raceways are spherical.
The center of curvature of the outer ring raceway surface is consistent with the center of the bearing, so it has the same self-aligning function as the self-aligning Ball Bearing. When the shaft and housing are deflected, they can be adjusted automatically without increasing the bearing burden. Spherical roller bearings can withstand radial loads and axial loads in two directions. Large radial load capacity, suitable for heavy loads and shock loads. The inner diameter of the inner ring is a bearing with a tapered bore, which can be directly mounted. Or install it on the cylindrical shaft using an adapter sleeve and a dismantling sleeve. The cages use steel stamping cages, polyamide forming cages and copper alloy turning cages. The self-aligning ball bearing has two structures of cylindrical hole and conical hole, and the material of the cage is steel plate, synthetic resin, etc. Its characteristic is that the outer ring raceway is spherical, with automatic centering, which can compensate for the errors caused by non-concentricity and shaft deflection, but the relative inclination of the inner and outer rings should not exceed 3 degrees. It can bear large radial load and also bear certain axial load. The outer ring raceway of this type of bearing is spherical, so it has self-aligning performance. When the shaft is bent or tilted under force, so that the relative inclination of the center line of the inner ring and the center line of the outer ring does not exceed 1°~2.5°, the bearing can still work. .
The inner hole of self-aligning ball bearing has two types: cylindrical and conical. The taper of the conical bore is 1:1 2 or 1:30. In order to enhance the lubricating performance of the bearing, an annular oil groove and three oil holes are machined on the outer ring of the bearing.
Self-aligning ball bearing product features：
Mainly bear radial load, and can bear small axial load at the same time. The axial displacement of the shaft (housing) is limited within the clearance limit, and it has automatic centering performance. It allows normal operation under the condition that the inner and outer periphery are relatively inclination. It is suitable for the parts where the bearing seat hole cannot strictly guarantee the coaxiality.
Self-aligning ball bearing structure
The self-aligning ball bearing with dust cover and sealing ring has been filled with an appropriate amount of grease during assembly. It should not be heated or cleaned before installation. It does not need to be lubricated during use. It is suitable for operating temperature - 30 ℃ to + 120 ℃ between. Main uses of self-aligning ball bearings: suitable for precision instruments, low-noise motors, automobiles, motorcycles and general machinery, etc., and are the most widely used type of bearings in the machinery industry.
Application
1.Industrial pumps 2.Industrial Gearboxes 3.Compressors 4.Trucks,bus,trailers 5.Industrial electric motors & generator 6.Renewable energy 7. gear bearing 8.printing machine bearing 10.robot bearing
Quality Control Process
1.Assembly
2.Windage test
3.Cleaning
4.Rotary test
5.Greasing and gland
6.Noise inspection
7.Appearance inspection
8.Rust prevention
9.Product packaging
Related Number
Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.
Q:What's the MOQ?
A: MOQ is 5 pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
Q:Do you offer free samples?
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users.
Q:How to place order?
A:Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you;
2. Proforma Invoice made and sent to you as the price agreed by both parts;
3. Deposit Payment after confirming the PI and we arrange production;
4. Balance paid before shipment or after copy of Bill of Loading.
Contact Now
