Jinan Bosch Bearing Co.,Ltd

Home> Blog> Detailed installation method of ball bearing deep groove ball bearing

Detailed installation method of ball bearing deep groove ball bearing

August 10, 2022
Bearings without cages are installed; usually more than half of the steel balls are loaded first; or steel balls are loaded in the number of 186. according to the filling angle; other steel balls are to be loaded from the filling gaps. Fall out; the radius of curvature of the inner and outer gaps of the bearing is equal to or greater than the radius of curvature of the sodium ball; but the minimum spacing between the inner and outer notches is smaller than the diameter of the steel ball. The same; the ball is loaded with the ball; the steel ball is not easy to enter. Among the bearing channels.
The ball is raised and rushed to each side with a viewpoint; it is inclined; it is easy to be pressed to open the gap. There is a ball socket in the rising and rushing; it can be put into the steel ball; after the rushing; the steel ball enters the raceway. When loading the ball; The inner and outer gaps must be aligned; the inclined surface of the punch is used under the press of the press. The internal and external factors are elastically deformed together to expand; the gap size is increased; the steel ball can be properly connected to the bearing. If the hydraulic machine is used to load the ball; the steel ball can be opened when the gap is opened. Installed in succession. If using a crankshaft press and other equipment to load the ball; 5rJ after each steel ball; should pull or change the ferrule to make the steel ball out of the gap; in order to reload the next steel ball; until the steel ball is full Stop. When using the ball to fill the ball; prevent the use of large tonnage crankshaft or core press; avoid the formation of a safety accident.
Select the type 5 cage with the ball-notched deep groove Ball Bearing; the number of steel balls is even. In the installation; first install half of the steel ball into the bearing; then enter the 5-type cage from the bearing end side; Separate the ball. Then apply the upswing from the ball gap; insert the other half of the ball into the other side of the s-type cage. Because the ball and the cage are mutually disturbed; the gap between the inside and the outside is difficult to The ball socket of the cage is aligned; therefore, the ball loading process is difficult; usually it is necessary to rotate the bearing for dozens of reasons to push the orientation of the three.


This article links to http://
Please indicate China Bearing Network http://
Contact Us

Author:

Mr. Star Wang

Phone/WhatsApp:

+8613563512935

Popular Products
Company News
You may also like
Related Information
How to choose ball bearing and roller bearing?

The choice of ball bearings and roller bearings: 1. There are two camps in the current auto bearing shopping mall; one is the most used roller bearing (such as the product of Huifang Company); the...

Deep groove ball bearing performance characteristics of deep groove ball bearings

With the continuous development of our country's heavy industry, some parts and components that are often used in the fields of architecture and engineering have also been surfaced. Deep groove ball...

Detailed installation method of ball bearing deep groove ball bearing

Bearings without cages are installed; usually more than half of the steel balls are loaded first; or steel balls are loaded in the number of 186. according to the filling angle; other steel balls are...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Mr. Star Wang

Phone/WhatsApp:

+8613563512935

Popular Products
Company News

Send Inquiry

Star Wang

Mr. Star Wang

Tel:86--82804967

Fax:

Mobile Phone:+8613563512935

Email:info@bosch-bearing.com

Address:Mingquan Plaza, K88, Dikou Road, Tianqiao District, Jinan, Shandong

Mobile Site

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send