Company News

• Most popular bearings at Consolidated

  2022 / 10 / 17

  Bearing and bearings-related products are very important components in most machinery.Their primary purpose is to roll by minimizing friction. Various applications require bearings explicitly designed to handle a particular kind of load. For instance, most radial ball bearings can handle both radial and thrust loads. While roller bearings are better suited where only radial loads are required. The intended use for the bearings should be considered along with load ratings, limiting speeds, before selecting and installing a particular type of bearing. Deep Groove Ball Bearings Deep grove ball bearings are the most widely used bearing type and are extremely versatile. They have low friction and are optimized for low noise and vibration which enables high rotational speeds. The purpose of deep groove precision ball bearings is to reduce rotational friction and support radial and axial loads. Radial Ball bearings can support moderate radial loads and moderate axial loads (parallel to the shaft). They can operate at high speeds (400,000 RPMs and higher). Features of Deep Groove Ball Bearings: They can handle radial and a limited axial (or thrust) load. Deep groove ball bearin

• Thrust ball bearing

  2022 / 08 / 11

  The thrust ball bearing is a kind of separate bearing; the shaft ring and the seat ring can be separated from the cage and the steel ball assembly. The shaft ring is a ferrule matched with the shaft; the seat ring is a ferrule matched with the bearing seat hole; There is a gap between the shaft and the shaft. Two-way thrust angle contact ball bearing; touch angle is 60 degrees; consists of a double groove seat with smooth oil groove, two shaft rings, two sets of steel ball cage assemblies; and a spacer ring. The unevenness of the spacer ring can Adjust the size of the pre-interference of the angular contact ball bearing when selecting the bearing. The thrust spherical roller bearing consists of a shaft ring, a race and a set of asymmetric spherical rollers. Inside the bearing; the effect line of the roll load and the bearing axis are skewed into a certain touch angle; capable of accepting heavier axial loads Also capable of accepting radial loads; thrust roller bearings with active centering function for receiving heavier axial loads; occupying space. こ . Thrust roller bearings It consists of a shaft ring, a race, a cage and a roller assembly; all three can be separated. One-way thrust roller bearings can only accept axial loads in one direction.

• How to Install spherical bearing?

  2022 / 08 / 10

  Spherical bearing Use of an arbor press or hydraulic press is recommended. Under no circumstances should a hammer or any other type of shock-inducing impact method be used. A suitable installation tool is advised. A guide pin aligns the ball in a 90° position, but all force is applied to the outer race face only. A lead chamfer or radius on either the bearing or housing is essential.