Thrust ball bearing

The Thrust Ball Bearing is a kind of separate bearing; the shaft ring and the seat ring can be separated from the cage and the steel ball assembly. The shaft ring is a ferrule matched with the shaft; the seat ring is a ferrule matched with the bearing seat hole; There is a gap between the shaft and the shaft.
Two-way thrust angle contact Ball Bearing; touch angle is 60 degrees; consists of a double groove seat with smooth oil groove, two shaft rings, two sets of steel ball cage assemblies; and a spacer ring. The unevenness of the spacer ring can Adjust the size of the pre-interference of the Angular Contact Ball Bearing when selecting the bearing.
The thrust Spherical Roller Bearing consists of a shaft ring, a race and a set of asymmetric spherical rollers. Inside the bearing; the effect line of the roll load and the bearing axis are skewed into a certain touch angle; capable of accepting heavier axial loads Also capable of accepting radial loads; Thrust Roller Bearings with active centering function for receiving heavier axial loads; occupying space. こ . Thrust roller bearings It consists of a shaft ring, a race, a cage and a roller assembly; all three can be separated. One-way thrust roller bearings can only accept axial loads in one direction.